Adapters 16AD

16ADA
	Up to 16 W Mounting with self-adhesive tape Stabilized output voltage Output voltage range from 3,1 V to 48 V Input – line twin-lead with double insulation Output – isolated twin-lead Protection IP20

These converters are intended for general use to feed electric and electronic devices in covered rooms, in environments without risk of explosion. Output is galvanically separated, therefore it is possible to use them as power supplies of negative voltage, eventually by connecting multiple converters together to use them as power supplies of symmetrical voltage or multi-level power supplies. Output voltage can be in range from 3,1 V up to 48 V.

Nominal output voltages and corresponding max. currents are listed in table below. The converter is protected against short-circuit on output. Connection of input lines is realized through twin-lead with double insulation. On the output there is a black-red twin-lead.

The method of mounting without usage of tools and such operations as drilling is usable to advantage especially with additional installation into electric and electronic devices, e.g. placing the power supply directly into camera cover.

Table 1: Technical data   Output voltage 195 - 255 V AC Operating temperature -15 °C až +40 °C Short-circuit protection on output <1 min. (short-term) Insulation voltage 3000 V AC Protection IP20 Dimensions 55 × 41 × 45 mm Weight 80 g Electrical safety standard EN 60950-1:2003 EMC EN 55011+A1:2002 EN 61000-3-2:2002 EN 61000-3-3:2000+A1:2003 EN 61000-6-1:2003

Dokuments   Leaflet 16ADA Leaflet for all 16AD adapters Declaration of conformity

Table 2: Models of AC/DC converter 16ADA

Type of connectors on output wire:

Type .00 – without connector Length of output wire is 30 cm.	Type .04 Length of output wire is 30 cm.	Type .06 Length of output wire is 30 cm.
	Type .05 Length of output wire is 30 cm.	Type .07 Length of output wire is 30 cm.

16ADR
	Do 16 W Upevnenie na DIN lištu Stabilizované výstupné napätie Rozsah výstupných napätí od 3,1 V do 48 V Vstup – svorkovnica Výstup – svorkovnica Krytie IP00

These converters are intended for general use to feed electric and electronic devices in covered rooms, in environments without risk of explosion. Output voltage can be in range from 3,1 V up to 48 V. The power supply is designed to be mounted on a DIN rail, which predetermines its usage in a distributor box. The connection of input and output wires is realized through screw clamps. Input and output clamps are not protected against touch to dangerous voltage. This protection must be provided by the customer.

 

Nominal output voltages and corresponding max. currents are listed in table below. The converter is protected against short-circuit on output.

 

Table 1: Technical data   Output voltage 195 - 255 V AC Operating temperature -15 °C až +40 °C Short-circuit protection on output <1 min. (short-term) Insulation voltage 3000 V AC Protection IP00 Dimensions 56 × 47 × 39 mm Weight 85 g Electrical safety standard EN 60950-1:2003 EMC EN 55011+A1:2002 EN 61000-3-2:2002 EN 61000-3-3:2000+A1:2003 EN 61000-6-1:2003

Dokumenty   Prospekt 16ADR Leaflet for all 16AD adapters Declaration of conformity All documents

 

Table 2: Models of AC/DC converter 16ADR

	Output voltage	Output current	Stability	Ripple	Noise
16ADR030/25	3,1 V	2,5 A	2 %	<130 mV	<150 mV pp
16ADR050/25	5,1 V	2,5 A	2 %	<130 mV	<150 mV pp
16ADR060/25	6 V	2,5 A	2 %	<120 mV	<150 mV pp
16ADR069/14	6,9 V	1,4 A	2 %	<120 mV	<150 mV pp
16ADR090/14	9 V	1,4 A	1 %	<120 mV	<150 mV pp
16ADR120/14	12 V	1,4 A	1 %	<120 mV	<150 mV pp
16ADR138/12	13,8 V	1,2 A	1 %	<100 mV	<100 mV pp
16ADR150/11	15 V	1,1 A	1 %	<100 mV	<100 mV pp
16ADR180/09	18 V	0,9 A	1 %	<80 mV	<100 mV pp
16ADR240/07	24 V	0,7 A	1 %	<80 mV	<100 mV pp
16ADR276/06	27,6 V	0,6 A	1 %	<80 mV	<100 mV pp
16ADR480/03	48 V	0,3 A	1 %	<120 mV	<150 mV pp

 

16ADS
	Do 16 W Adaptéry sa pripájajú do sieťovej zásuvky Stabilizované výstupné napätie Rozsah výstupných napätí od 3,1 V do 48 V Výstup – izolovaná dvojlinka Krytie IP20

These converters are intended for general use to feed electric and electronic devices in covered rooms, in environments without risk of explosion. Output voltage can be in range from 3,1 V up to 48 V. The adapters are characterized by small weight and high efficiency.

 

Nominal output voltages and corresponding max. currents are listed in table below. The converter is protected against short-circuit on output.

 

Table 1: Technical data   Output voltage 195 - 255 V AC Operating temperature -15 °C až +40 °C Short-circuit protection on output <1 min. (short-term) Insulation voltage 3000 V AC Protection IP20 Dimensions 55 × 41 × 45 mm Weight 90 g Electrical safety standard EN 60950-1:2003 EMC EN 55011+A1:2002 EN 61000-3-2:2002 EN 61000-3-3:2000+A1:2003 EN 61000-6-1:2003

Dokumenty   Prospekt 16ADS Leaflet for all 16AD adapters Declaration of conformity All documents

 

Table 2: Models of AC/DC converter 16ADS

	Output voltage	Output current	Stability	Ripple	Noise
16ADS030/25.xx	3,1 V	2,5 A	2 %	<130 mV	<150 mV pp
16ADS050/25.xx	5,1 V	2,5 A	2 %	<130 mV	<150 mV pp
16ADS060/25.xx	6 V	2,5 A	2 %	<120 mV	<150 mV pp
16ADS069/14.xx	6,9 V	1,4 A	2 %	<120 mV	<150 mV pp
16ADS090/14.xx	9 V	1,4 A	1 %	<120 mV	<150 mV pp
16ADS120/14.xx	12 V	1,4 A	1 %	<120 mV	<150 mV pp
16ADS138/12.xx	13,8 V	1,2 A	1 %	<100 mV	<100 mV pp
16ADS150/11.xx	15 V	1,1 A	1 %	<100 mV	<100 mV pp
16ADS180/09.xx	18 V	0,9 A	1 %	<80 mV	<100 mV pp
16ADS240/07.xx	24 V	0,7 A	1 %	<80 mV	<100 mV pp
16ADS276/06.xx	27,6 V	0,6 A	1 %	<80 mV	<100 mV pp
16ADS480/03.xx	48 V	0,3 A	1 %	<120 mV	<150 mV pp
.xx – this number specifies type of connector on output wire

Type of connectors on output wire:

Type .00 – without connector Length of output wire is 1,5 m.	Type .04 Length of output wire is 1,5 m.	Type .06 Length of output wire is 1,5 m.
Type .02 – car connector Length of output wire is 5 m.	Type .05 Length of output wire is 1,5 m.	Type .07 Length of output wire is 1,5 m.

Usage of car connector .02: Using car connector, e.g. for 13,8 V power supplies of type 12ADS makes it possible, among other, to maintain accumulators in charged state directly in vehicle through lighter connector or through specially for this purpose led out connector. It can be used to advantage with fire service vehicles, that have to be always ready to drive out and while parking startup accumulators lose capacity due to self discharge and in winter also because of low temperature.